One of the first questions after a positive pregnancy test is also the simplest: when is the baby due? The Pregnancy Due Date Calculator on FreeToolZones gives an evidence-based estimate from a single date: the first day of your last menstrual period, known as the LMP. Using Naegele’s rule, the standard method used in prenatal care, it adds 280 days, or 40 weeks, to the LMP to estimate the due date. It also shows the current gestation in weeks and days, the estimated date of conception, and a milestone table covering the end of the first trimester, the start of the second trimester, the start of the third trimester, and the due date itself.
The result is an estimate, not a prediction of the exact day of birth. Only a small share of babies arrive exactly on the due date, and most are born within a window of a couple of weeks on either side. The calculation also assumes a regular 28-day cycle with ovulation around day 14, which is not true for everyone. The tool states both of these caveats in its own note, and this article repeats them, because they shape how the result should be used. The due date is a planning anchor for prenatal appointments, scans, leave arrangements, and preparations, and it should always be confirmed with a doctor or midwife, who may adjust it based on an early ultrasound scan. Results are estimates for guidance only and are not medical advice.
What Is the Pregnancy Due Date Calculator?
The Pregnancy Due Date Calculator is a free online tool that estimates a due date from the first day of the last menstrual period. It asks for a single input: the LMP date. The due date is calculated as the LMP plus 280 days, following Naegele’s rule. The estimated conception date is the LMP plus 14 days, reflecting the assumption of ovulation around day 14 of a 28-day cycle. The milestone dates are the LMP plus 97 days for the end of the first trimester (13 weeks and 6 days), plus 98 days for the start of the second trimester (14 weeks), plus 196 days for the start of the third trimester (28 weeks), and plus 280 days for the due date (40 weeks).
The outputs are three headline figures and a milestone table. “Estimated due date” is the 40-week date. “Current gestation” is the time from the LMP to today, expressed in weeks and days, or shown as over 42 weeks if the LMP is more than 294 days ago, in which case the tool also displays a note suggesting that the pregnancy may already be complete and the date should be double-checked. “Estimated conception” is the LMP plus 14 days. The table lists each milestone with its date. Dates are shown in full, for example 8 October 2026, so they can be read without converting a numeric format.
The tool validates the LMP date in two ways. If no date is entered, it asks for the first day of the last menstrual period. If the date is in the future, it shows an error, because the LMP cannot be after today. The calculation uses today’s date only to work out the current gestation; the due date and milestone dates depend solely on the LMP, so they do not change from day to day. The calculation runs entirely in the browser, so the date entered is never uploaded or stored.
How to Use the Pregnancy Due Date Calculator
- Find the first day of your last menstrual period. This is the first day of bleeding of the most recent period before conception, not the last day, and not the date of a missed period. Check a calendar, a period-tracking app, or your own notes. If you are unsure of the exact day, use your best estimate and tell your clinician that the date is uncertain.
- Enter the LMP date. Type or select the date in the field labelled “First day of last menstrual period (LMP)”. The hint below the field restates the rule: due date equals the first day of the LMP plus 280 days (40 weeks).
- Press “Calculate due date”. Click the button labelled “Calculate due date”. The results and the milestone table appear below the form.
- Read the three headline figures. The estimated due date is the main result. The current gestation tells you how far along the pregnancy is counted from the LMP. The estimated conception date is approximate and assumes ovulation on day 14.
- Read the milestone table. The table gives the dates for estimated conception, the end of the first trimester, the start of the second trimester, the start of the third trimester, and the due date. These dates help with planning appointments and preparations by trimester.
- Share the result with your clinician. Take the LMP date and the estimated due date to your first prenatal appointment. An early ultrasound scan may confirm or adjust the due date, and the clinician’s date then takes precedence over the calculator’s estimate.
Understanding Your Results
Gestation is counted from the LMP, not from conception, which surprises many people. That means the “current gestation” figure includes about two weeks before conception actually occurred, and a person is considered 4 weeks pregnant at the time of a missed period, even though conception happened about two weeks earlier. This convention exists because the LMP is usually known with more certainty than the conception date, and it is the convention used throughout prenatal care, in scans, and in medical records. The tool follows the same convention, so its gestation figure can be compared directly with clinical notes.
Key Features of the Pregnancy Due Date Calculator
- Single-date input. Only the LMP date is needed, which makes the tool quick to use and easy to revisit if the LMP date is revised.
- Naegele’s rule, the standard method. The due date is the LMP plus 280 days, the method taught and used in prenatal care worldwide, so the estimate matches what a clinician would calculate from the same date.
- Current gestation in weeks and days. The tool counts from the LMP to today and expresses the result in the weeks-and-days format used in prenatal records, for example 12 weeks and 3 days.
- Estimated conception date. The LMP plus 14 days gives an approximate conception date under the regular-cycle assumption, which helps with understanding the timeline, while remaining clearly labelled as an estimate.
- Trimester milestone table. The five milestone dates give a clear roadmap of the pregnancy, from conception through each trimester boundary to the due date.
- Over-42-weeks warning. If the LMP is more than 42 weeks ago, the tool flags that the pregnancy may already be complete and the date should be checked, which catches mistyped years and old dates.
- Private and instant. The calculation runs in your browser. No personal or health information is uploaded or stored.
Practical Use Cases and Worked Examples
Example 1: An LMP of 1 January 2026
Enter 1 January 2026 as the LMP. The estimated due date is 1 January plus 280 days, which is 8 October 2026. The estimated conception date is 15 January 2026. The first trimester ends on 8 April 2026 (13 weeks and 6 days), the second trimester starts on 9 April 2026 (14 weeks), and the third trimester starts on 16 July 2026 (28 weeks). If today is in mid-February 2026, the current gestation would be about 6 weeks. This example shows the full output: a due date roughly nine calendar months after the LMP, with trimester boundaries spaced about three months apart. The dates can be used to plan the timing of the first appointment, the dating scan, and announcements to family and employers.
Example 2: An LMP of 10 March 2026
Enter 10 March 2026 as the LMP. The estimated due date is 10 March plus 280 days, which is 15 December 2026. The estimated conception date is 24 March 2026. The milestone table would show the first trimester ending in mid-June, the second trimester starting just after, and the third trimester starting in late September. A December due date raises practical questions that the calculator helps to surface early: holiday-season hospital arrangements, leave planning around the end of the year, and the timing of prenatal classes. The due date itself is the anchor for all of these plans, and having it in the first weeks of pregnancy gives the maximum time to prepare.
Example 3: Checking gestation at a particular moment
A person with an LMP of 1 January 2026 checks the calculator on 1 April 2026. The time from the LMP to 1 April is 90 days, which is 12 weeks and 6 days of gestation, just before the end of the first trimester. The due date remains 8 October 2026, because it depends only on the LMP. This distinction is useful: the gestation figure moves every day, while the due date and milestone dates are fixed once the LMP is known. If an ultrasound later adjusts the due date by a few days, the gestation counted from the new date will differ slightly, and the clinician’s dates should be used from that point on.
Other uses include estimating a due date before the first appointment so that questions can be prepared, working out trimester boundaries for travel and work planning, and understanding a due date given by a clinician by checking it against the LMP. In each case, the calculator is a starting point, and the clinician’s assessment, informed by examination and scans, is the authoritative source.
Tips for Getting Accurate Results
Be as certain as possible about the LMP date. The entire calculation rests on it, and an error of a week in the LMP moves the due date by a week. Use the first day of full bleeding, not spotting before the period, and not the last day of the period. If you track periods in an app or a diary, use the recorded date rather than memory. If the LMP is genuinely uncertain, say so to your clinician, because the dating scan becomes more important in that case, and the scan-based date will be more reliable than an LMP-based estimate.
Consider your cycle length. Naegele’s rule assumes a 28-day cycle with ovulation on day 14. If your cycles are regularly longer, for example 35 days, ovulation probably occurred later than day 14, and the true due date may be several days later than the calculator shows. If your cycles are regularly shorter, the opposite applies. The tool does not ask for cycle length, so it cannot make this adjustment. Mention your usual cycle length at the first appointment, and let the clinician and the scan refine the date.
Remember that the due date is the middle of a range, not a deadline. Only a small share of babies are born on the exact due date, and a birth from about 37 to 42 weeks is within the normal range. Plan to be ready a few weeks before the due date, with the hospital bag packed, transport arranged, and leave plans flexible, rather than treating the due date as the day everything must be ready. If the pregnancy goes past the due date, the clinician will monitor and advise; the calculator’s date does not change the medical plan.
Limitations to Keep in Mind
The calculator assumes a regular 28-day cycle, ovulation on day 14, and an accurate LMP date. Irregular cycles, recent hormonal contraception, breastfeeding, fertility treatment, and uncertainty about the LMP all reduce the reliability of the estimate. For pregnancies conceived with fertility treatment, the conception or transfer date is usually known precisely, and the clinician will calculate the due date from that date rather than from the LMP; the calculator’s LMP-based result should not override that method.
The tool provides dates only. It does not assess the health of the pregnancy, the suitability of any activity, medication, or travel, or the need for any test or appointment. It does not replace prenatal care, and it cannot detect problems. Results are estimates for guidance only and are not medical advice. Attend prenatal appointments as advised, report any concerning symptoms promptly to a clinician, and follow the advice of your own doctor or midwife, who knows your individual circumstances.
Frequently Asked Questions
How is the due date calculated?
By Naegele’s rule: the first day of the last menstrual period plus 280 days, which is 40 weeks. For an LMP of 1 January 2026, the due date is 8 October 2026. The method assumes a regular 28-day cycle with ovulation around day 14.
Why is pregnancy counted from the last period instead of conception?
Because the LMP is usually known more reliably than the conception date. Counting from the LMP is the standard convention in prenatal care, so gestation in weeks and days, scan measurements, and medical records all use the same starting point. Conception is estimated as LMP plus 14 days under the regular-cycle assumption.
Will the baby be born on the due date?
Probably not exactly. Only a small share of babies arrive on the due date itself, and most are born within a couple of weeks on either side. Treat the due date as the centre of the expected window, and be prepared a few weeks early.
What if my cycles are not 28 days?
The estimate may be off by several days. Longer cycles usually mean a later true due date, and shorter cycles an earlier one, because ovulation timing shifts. Tell your clinician your usual cycle length, and rely on the early ultrasound scan for a refined date.
What does the over-42-weeks note mean?
It means the LMP entered is more than 294 days before today, so the counted gestation exceeds 42 weeks. In most cases this means the date was mistyped, for example the wrong year, or the pregnancy has already ended. Double-check the date and correct it if needed.
Should I trust the calculator or the ultrasound scan?
Trust the clinician’s assessment, informed by the scan. An early ultrasound measures the embryo or fetus and can date the pregnancy more accurately than the LMP alone, especially when cycles are irregular or the LMP is uncertain. The calculator is a helpful first estimate before the scan.
Related Tools
For related date and family calculations, try the Ovulation Calculator for fertile window estimates, the Age Calculator for exact ages from birth dates, the Date Difference Calculator for gaps between dates, the Add Days to Date tool for counting forward from a date, and the Baby Name Generator for naming ideas.