The CSS Text Shadow Generator lets you add depth, glow, and emphasis to text by tuning a shadow behind the letters and watching the result on your own words. Text shadows lift a headline off its background, make white text readable over a photograph, and give display type a sense of craft. A subtle shadow can be the difference between a headline that blends into the page and one that commands the first glance.
Writing a text-shadow value by hand means guessing at offsets and blur until the letters look right, and the best values depend heavily on the font size and the background. The CSS Text Shadow Generator makes the process visual. Type the exact text you plan to use, set the offsets and blur, pick the text and shadow colours, choose a font size, and the preview shows the result in large bold type. The CSS panel holds the single declaration you need.
What Is the CSS Text Shadow Generator?
The CSS Text Shadow Generator is a visual editor for the CSS text-shadow property. It builds one shadow from a horizontal offset, a vertical offset, a blur radius, and a shadow colour. The preview text, its colour, and its font size are also controlled in the tool, so you can judge the shadow in conditions close to your real design. The output is a single text-shadow declaration.
The preview text defaults to Hello World, in a deep green at 48 pixels, with a shadow offset 2 pixels right and 4 pixels down, blurred by 6 pixels, in a dark colour. The preview text is rendered in a heavy weight, which shows the shadow clearly along the letter edges. Horizontal and vertical offsets each run from minus 30 to 30 pixels, blur runs from 0 to 30 pixels, and font size runs from 16 to 96 pixels.
Unlike the box shadow tool, this generator does not include a spread value or an opacity slider, because the text-shadow property itself has no spread or inset. The shadow colour is output exactly as picked, in hex form, so if you want a softer shadow you should pick a lighter colour or increase the blur rather than expecting a transparency control. The text colour and font size controls affect only the preview; they are not included in the copied declaration, which contains the shadow alone.
- Preview text control: a text field so you can test the shadow on your real headline.
- Offset sliders: horizontal and vertical offsets from minus 30 to 30 pixels.
- Blur slider: blur radius from 0 to 30 pixels.
- Two colour pickers: a text colour for the letters and a shadow colour for the shadow.
- Font size slider: preview sizes from 16 to 96 pixels.
How to Use the CSS Text Shadow Generator
Use your real headline text and a realistic size. A shadow tuned on placeholder words often needs retuning on the final wording.
- Enter the preview text. Type your headline or label in the Preview text field. If the field is left empty, the preview falls back to the word Preview. Longer text shows how the shadow behaves across word boundaries and letter shapes.
- Choose the text colour. Use the Text color picker for the letters themselves. This affects the preview only, but it is essential for judging whether the shadow helps or harms readability.
- Choose the shadow colour. Use the Shadow color picker for the shadow. A dark shadow suits light text on a light background, while a light shadow or glow suits dark text on a dark background.
- Set the horizontal offset. Drag the Horizontal offset slider between minus 30 and 30 pixels. Positive values move the shadow right, negative values move it left, and zero centres it behind the letters.
- Set the vertical offset. Drag the Vertical offset slider between minus 30 and 30 pixels. A small positive value drops the shadow below the text, as if light comes from above. A zero vertical offset with a large blur creates a glow.
- Adjust the blur and font size. Drag the Blur radius slider between 0 and 30 pixels, and the Font size slider between 16 and 96 pixels. Larger text usually needs a larger offset and blur for the shadow to remain visible.
- Copy the CSS. Click Copy CSS and paste the text-shadow declaration into the rule for your heading or label. Add the text colour and font size separately in your own stylesheet, because they are not part of the output.
Key Features of the CSS Text Shadow Generator
The tool mirrors the text-shadow syntax exactly, with preview controls that make the effect of each value obvious.
- Real-text preview: testing with your own words reveals problems that a generic sample hides, such as shadows that clutter descenders or tight letter spacing.
- Bidirectional offsets: negative and positive ranges allow shadows in any direction, including raised effects where the shadow falls above the text.
- Large type preview: sizes up to 96 pixels suit display headings, posters, and hero text, where shadows are most commonly used.
- Heavy preview weight: bold rendering makes the shadow edge easy to inspect, even at small blur values.
- Single declaration output: the panel contains one text-shadow line, ready to paste without editing.
- Instant feedback: every control updates the preview and the CSS together, with no generate step.
Practical Use Cases
Text shadows solve specific readability and emphasis problems. The examples below show where they help most.
Headlines over photographs
White headline text over a busy photograph can disappear where the image is bright. A dark shadow with a moderate blur creates a soft halo that separates the letters from the image, restoring readability without a solid overlay. Keep the blur generous and the offsets small for this job.
Hero and display headings
Large display type benefits from a gentle shadow that lifts it off the background. A small downward offset with a soft blur adds depth without looking dated. Avoid hard-edged shadows on display type, which can make the heading look like a sticker.
Glow effects for dark interfaces
On a dark background, a light-coloured shadow with zero offsets and a large blur creates a glow around the letters. This suits neon-style headings, game interfaces, and status labels that should feel luminous. Use the effect sparingly, because glowing text everywhere quickly becomes tiring.
Embossed and letterpress effects
A light shadow offset upward by one pixel, or a dark shadow offset downward by one pixel, can make text look pressed into or raised from its surface. These effects need very small offsets and little or no blur, and they work best on short labels in muted colours.
Labels on coloured cards
Short labels on gradient or coloured cards sometimes need a touch of separation from the background. A subtle shadow in a darker shade of the card colour keeps the label readable without introducing a new colour or a background box behind the text.
Tips and Best Practices
Text shadows should support reading, not decorate it. Subtlety is the rule, with bold effects reserved for short display text.
- Keep body text clean: shadows on paragraph text reduce readability and tire the eyes. Reserve text shadows for headings, labels, and short display strings.
- Soften with blur: a hard shadow with zero blur looks like a duplicate of the text. A few pixels of blur usually make the shadow read as depth rather than as a second copy.
- Scale with size: a shadow tuned for 16 pixel text will look invisible at 72 pixels. Retune the offsets and blur whenever the font size changes significantly.
- Check the background: a shadow that works on a plain background may fail on a photograph or a gradient. Test the final combination, not the preview alone.
- Avoid competing effects: do not combine a strong text shadow with a strong background pattern, an underline, and a bright colour at the same time. Let one effect carry the emphasis.
- Consider accessibility: never rely on a shadow alone to make text readable. If the text is unreadable without the shadow, improve the colour contrast first.
Limitations
This generator builds exactly one shadow. It does not support multiple comma-separated shadows, which are sometimes layered to create outlines, stacked depth, or combined glow and drop effects. There is no opacity control, no spread control, and no control for the font family, weight, letter spacing, or line height in the output, because those properties are outside the text-shadow declaration.
The preview uses a heavy weight and a plain background, so it cannot show how the shadow will look with your font, your background image, or your surrounding layout. The text colour and font size you choose affect the preview only and are not included in the copied CSS. You must set those properties in your own rule alongside the shadow.
- One shadow only; no layered shadows.
- No opacity, spread, or font controls in the output.
- Text colour and font size are preview-only settings.
- Preview background is plain; real backgrounds may differ.
Frequently Asked Questions
What does each value in a text-shadow declaration mean?
In order, the values are the horizontal offset, the vertical offset, the blur radius, and the shadow colour. Positive horizontal values move the shadow right, positive vertical values move it down, and a larger blur softens the edge. This tool generates the values in exactly that order.
Why is my text shadow invisible?
The shadow may be the same colour as the background, the blur may be so large that it has faded away, or the offsets may place it directly behind the letters with no blur. Try a darker or lighter shadow colour, reduce the blur, and increase one of the offsets to confirm the shadow is rendering.
Can I make the shadow softer without an opacity slider?
Yes. Increase the blur radius to spread the shadow over a wider area, or pick a shadow colour closer to the background colour. Both approaches soften the effect. For precise transparency, you can edit the copied colour to an rgba value by hand in your stylesheet.
Should I use text shadows on body text?
Generally no. Shadows on long passages reduce legibility, especially at small sizes and on low-resolution screens. Reserve text shadows for headings, hero text, labels, and other short strings where the emphasis justifies the effect.
Does text-shadow affect layout or accessibility?
A text shadow does not change the size or position of the text box, so it does not affect layout. For accessibility, treat the shadow as decoration: the text itself must have sufficient contrast against its background, with or without the shadow.
Text Shadows Through Design History
Text shadows have gone in and out of fashion several times, and each era used them differently. Early web design often used hard, offset shadows that mimicked printed drop shadows, giving headings a heavy, dimensional look. The flat design movement that followed rejected shadows almost entirely, favouring clean typography with no depth effects at all. Current practice sits between those extremes: shadows are used sparingly, with soft blur and low contrast, to solve specific problems such as readability over images, rather than as a default decoration on every heading.
That history is a useful guide to restraint. A shadow that draws attention to itself usually dates a design, while a shadow that quietly solves a readability problem goes unnoticed, which is exactly the point. When you tune a shadow in this tool, ask whether a reader would notice the shadow or notice the improved readability. If the answer is the shadow itself, soften the blur, reduce the offset, or bring the shadow colour closer to the background until the effect recedes. The best text shadow is the one the reader never consciously sees.
There is one exception to the rule of subtlety: deliberate display typography for posters, game interfaces, and brand moments, where the shadow is part of the artwork. A glowing heading on a dark landing page, or a bold offset shadow on a retro poster, is meant to be noticed, and the large font sizes in this tool, up to 96 pixels, support that kind of display work. Even there, the principle holds in a different form: the shadow should serve the typeface and the message, not compete with them. One strong effect per heading is enough, and the rest of the page should stay quiet so the display moment can carry the attention it asks for.
Related Tools
These tools cover box shadows, backgrounds, and other typography-adjacent styling.
- CSS Box Shadow Generator – add depth to boxes and cards with a similar offset model.
- CSS Background Generator – design the background that text and its shadow sit on.
- CSS Filter Generator – adjust blur and brightness effects on elements and images.
- Color Contrast Checker – verify that text remains readable with its shadow.
- CSS Button Generator – style button labels that sometimes carry a subtle shadow.