Home › All Tools ›

Trigonometry Calculator

Use Trigonometry Calculator online for free at FreeToolZones — no sign-up, no watermark.

Loading tool...

The Trigonometry Calculator on FreeToolZones computes all six trigonometric ratios, sine, cosine, tangent, cosecant, secant, and cotangent, for a single angle entered in degrees or radians. Trigonometry connects angles to ratios of sides in right triangles, and it underpins navigation, surveying, physics, engineering, computer graphics, and wave mathematics. This tool gives you the complete set of ratios at once, marks undefined ratios as Undefined instead of inventing a value, and shows the angle converted between degrees and radians, so you can move between the two units without a separate conversion step.

The six ratios come in reciprocal pairs. Sine and cosecant are reciprocals: cosecant is 1 divided by sine. Cosine and secant are reciprocals: secant is 1 divided by cosine. Tangent and cotangent are reciprocals: cotangent is 1 divided by tangent, which is also cosine divided by sine. Tangent itself is sine divided by cosine. Knowing these relationships means that if you know sine and cosine, you can derive the other four, and the tool’s display makes the reciprocal pattern visible: multiply a ratio by its reciprocal partner and you get 1, whenever both are defined.

What Is the Trigonometry Calculator?

The Trigonometry Calculator takes one angle and one unit choice, Degrees or Radians, and returns the six trigonometric values for that angle. Internally it converts the angle to radians, because the browser’s trigonometric functions use radians, then computes sine and cosine, cleans values extremely close to zero to exactly zero to avoid floating-point noise, and derives tangent, cotangent, secant, and cosecant from sine and cosine with explicit undefined checks. If cosine is zero, tangent and secant are Undefined. If sine is zero, cotangent and cosecant are Undefined.

The result display shows the six values in a grid, each labelled with its standard abbreviation: sin, cos, tan, cosec (csc), sec, and cot. Below the grid, a note restates the angle in both units: the entered angle and unit, the equivalent in radians, and the equivalent in degrees. For example, entering 45 degrees shows 45 degrees equals about 0.7853981634 radians equals 45 degrees. Entering 1 radian shows 1 radian equals 1 radian equals about 57.2957795131 degrees. That conversion line is a built-in angle converter for the angle you are working with.

Values are shown to ten decimal places. Exact special values appear as their familiar decimals: sine of 30 degrees is 0.5, cosine of 60 degrees is 0.5, tangent of 45 degrees is 1. Values that are irrational, such as sine of 45 degrees, appear rounded to ten places, about 0.7071067812. The cleaning step ensures that sine of 180 degrees shows as 0 rather than a tiny floating-point residue, and cosine of 90 degrees shows as 0, so the undefined checks for the reciprocal ratios trigger correctly.

How to Use the Trigonometry Calculator

  1. Enter the angle in the Angle field. The tool starts with 45 as an example.
  2. Choose the unit in the Unit dropdown: Degrees or Radians. The default is Degrees.
  3. Press Calculate, or change the angle or unit, because the results update automatically.
  4. Read the six values in the grid: sin, cos, tan, cosec, sec, and cot. Undefined values are labelled Undefined.
  5. Check the conversion note below the grid, which shows the angle in both degrees and radians.

With the default of 45 degrees, sine and cosine are both about 0.7071067812, tangent is 1, cosecant and secant are both about 1.4142135624, and cotangent is 1. Try 30 degrees: sine is 0.5, cosine is about 0.8660254038, tangent is about 0.5773502692, cosecant is 2, secant is about 1.1547005384, and cotangent is about 1.7320508076. Try 90 degrees: sine is 1, cosine is 0, tangent is Undefined, cosecant is 1, secant is Undefined, and cotangent is 0. Try 0 degrees: sine is 0, cosine is 1, tangent is 0, cosecant is Undefined, secant is 1, and cotangent is Undefined.

Switch to Radians and enter about 0.5235987756, which is pi divided by 6, to get the same values as 30 degrees: sine 0.5, cosine about 0.8660254038. Enter 1.5707963268, which is pi divided by 2, to get the 90-degree values. The unit matters enormously: sine of 30 degrees is 0.5, but sine of 30 radians is about minus 0.9880316241. Always confirm the unit before trusting a result, and use the conversion note to confirm that the tool interpreted your angle as you intended.

Key Features of the Trigonometry Calculator

  • All six ratios: Sine, cosine, tangent, cosecant, secant, and cotangent are shown together for one angle.
  • Degrees and radians: A dropdown selects the input unit, and the conversion note shows the angle in both units.
  • Honest undefined values: Ratios that involve division by zero are labelled Undefined, not shown as a large number or an error.
  • Clean zero handling: Values extremely close to zero are shown as 0, so special angles display their exact values.
  • Live updates: Changing the angle or the unit recalculates immediately, making it easy to compare angles.
  • High precision: Values are shown to ten decimal places, and the conversion note shows ten places for both units.

The definitions behind the ratios are worth recalling. In a right triangle with an acute angle theta, sine is the opposite side divided by the hypotenuse, cosine is the adjacent side divided by the hypotenuse, and tangent is the opposite side divided by the adjacent side. The reciprocal ratios are cosecant, hypotenuse over opposite; secant, hypotenuse over adjacent; and cotangent, adjacent over opposite. For angles beyond 90 degrees, the definitions extend via the unit circle, where sine is the vertical coordinate and cosine is the horizontal coordinate of the point on the circle. The tool uses the unit-circle definitions, so it works for any angle, including negative angles and angles greater than 360 degrees, by periodicity.

Practical Use Cases and Worked Examples

Example 1: Standard angles in degrees

Enter 30, 45, and 60 degrees in turn and record the sine and cosine values. At 30 degrees, sine is 0.5 and cosine is about 0.8660254038. At 45 degrees, both are about 0.7071067812. At 60 degrees, sine is about 0.8660254038 and cosine is 0.5. The symmetry is exact: sine of an angle equals cosine of its complement, so sine of 30 equals cosine of 60. Tangent at 60 degrees is about 1.7320508076, which is the square root of 3. These standard values are worth memorizing, and the tool confirms them instantly.

Example 2: Finding a height from an angle and a distance

You stand 50 metres from a building and measure the angle of elevation to the top as 30 degrees. The height above your eye level is 50 times tan(30 degrees). Enter 30 degrees to find tangent is about 0.5773502692. Multiply by 50 to get about 28.86751346 metres. Add your eye height, say 1.7 metres, to get a total height of about 30.57 metres. The same method works for trees, towers, and hills: tangent connects a horizontal distance and an elevation angle to a vertical height.

Example 3: Resolving a force or velocity

A force of 100 units acts at 60 degrees above the horizontal. Its horizontal component is 100 times cos(60 degrees), which is 100 times 0.5, which is 50. Its vertical component is 100 times sin(60 degrees), which is 100 times about 0.8660254038, which is about 86.60254038. Enter 60 degrees to get both ratios at once. The components satisfy the Pythagorean check: 50 squared plus about 86.6025 squared is 2500 plus 7500, which is 10000, whose square root is 100, the original force. Resolving vectors is one of the most common applied uses of sine and cosine.

Example 4: Radians and arc length

Switch to Radians and enter 2. The sine is about 0.9092974268 and the cosine is about minus 0.4161468365. The conversion note shows 2 radians equals about 114.5915590262 degrees, which is in the second quadrant, where sine is positive and cosine is negative, matching the signs. For arc length, an angle of 2 radians on a circle of radius 5 gives an arc length of 10, because arc length is radius times angle in radians. Radians are the natural unit for calculus and for any formula involving arc length or angular velocity, which is why the tool supports them directly.

Example 5: Undefined ratios and asymptotes

Enter 90 degrees to see tangent Undefined and secant Undefined, because cosine is 0. Enter 270 degrees to see the same pattern: sine is minus 1, cosine is 0, tangent is Undefined, and secant is Undefined. Enter 180 degrees to see cosecant Undefined and cotangent Undefined, because sine is 0. These undefined cases are not errors: they are points where the ratio has no finite value, and the graph of tangent has a vertical asymptote there. Approaching 90 degrees from below, tangent grows without bound: tan(89 degrees) is about 57.28996163, and tan(89.9 degrees) is about 572.9572134.

Example 6: Reciprocal checks

Enter 37 degrees. Sine is about 0.6018150232 and cosecant is about 1.6616401411. Multiply them: the product is 1, within rounding, confirming the reciprocal relationship. Cosine is about 0.7986355100 and secant is about 1.2521356582, whose product is also 1. Tangent is about 0.7535540501 and cotangent is about 1.3270448216, whose product is 1. Checking reciprocals is a quick way to catch a misread value: if a pair does not multiply to 1, you have read the wrong row or the wrong angle.

Tips and Best Practices

First, confirm the unit every time. Degrees and radians give completely different answers for the same number, and the tool cannot know which you meant. Second, learn the signs by quadrant: in the first quadrant, 0 to 90 degrees, sine and cosine are positive. In the second, sine is positive and cosine is negative. In the third, both are negative. In the fourth, sine is negative and cosine is positive. If a sign surprises you, check the quadrant. Third, use the conversion note to translate between units: multiply degrees by pi over 180 to get radians, and multiply radians by 180 over pi to get degrees.

Fourth, remember that Undefined is a valid answer for a ratio at certain angles, not a failure. Fifth, for triangle problems, draw the triangle and label the opposite, adjacent, and hypotenuse sides relative to your angle before choosing a ratio. Sixth, keep full precision until the final step: rounding sine or cosine to two places early can shift a height or distance answer noticeably. Finally, use the reciprocal relationships as checks, and use the identity sine squared plus cosine squared equals 1 as a stronger check: for any angle, the squares of sine and cosine must add to 1.

Limitations

The Trigonometry Calculator computes the six ratios for a single angle. It does not solve triangles, find missing sides or angles from side lengths, compute inverse trigonometric functions, or graph trigonometric functions. Inverse functions are available in the Scientific Calculator. The tool accepts one numeric angle; it does not accept expressions, degree-minute-second notation, or angles written with unit symbols.

Values are floating-point approximations shown to ten decimal places. Special values are cleaned to exact zeros where appropriate, but irrational values are rounded. Undefined ratios are labelled Undefined, with no indication of whether the ratio approaches positive or negative infinity from either side. The tool does not handle angles in turns, gradians, or other units.

Frequently Asked Questions

What is the difference between degrees and radians?

They are two units for measuring angles. A full circle is 360 degrees or 2 pi radians. One radian is about 57.29578 degrees. The tool lets you enter either unit and shows the conversion.

Why is tangent undefined at 90 degrees?

Because tangent is sine divided by cosine, and cosine of 90 degrees is 0. Division by zero is undefined, so the tool labels the value Undefined.

What are cosecant, secant, and cotangent?

They are the reciprocals of sine, cosine, and tangent. Cosecant is 1 over sine, secant is 1 over cosine, and cotangent is 1 over tangent, which is cosine over sine.

What is sin(30 degrees)?

It is 0.5. Cosine of 30 degrees is about 0.8660254038, and tangent of 30 degrees is about 0.5773502692.

Can I enter negative angles or angles over 360 degrees?

Yes. Trigonometric functions are periodic, so the tool computes values for any numeric angle, using the standard unit-circle definitions.

How do I find an angle from a ratio?

Use the inverse functions in the Scientific Calculator, such as asin, acos, and atan, with the angle unit set to match your needs. This tool computes ratios from angles, not angles from ratios.

Related Tools

Continue with the Scientific Calculator for inverse trigonometric functions and combined expressions, the Angle Converter for converting between angle units, the Quadratic Equation Solver for equations that arise in triangle problems, the Number Rounding Tool to round ratio values, and the Exponent Calculator for squaring sines and cosines in identity checks. You can also return to the FreeToolZones home page to browse the full tool collection.

Browse More Tools