The CSS Flexbox Generator lets you experiment with flexible box layout visually, arranging coloured items in a container and copying the CSS that reproduces the arrangement. Flexbox is the layout method behind countless navigation bars, card rows, centred heroes, and form layouts, but its properties interact in ways that are hard to predict from reading alone. Changing flex-direction swaps the meaning of the two alignment axes, and the difference between space-between and space-around is much clearer when you can see it.
This tool makes those interactions visible. Choose a direction, a wrapping behaviour, two alignment values, a gap, and a number of items, and the preview rearranges itself instantly. The CSS panel shows a .container rule with exactly the properties you set, so you can copy it into your project and rename the selector to match your markup. It is both a learning aid and a practical starting point for real layouts.
What Is the CSS Flexbox Generator?
The CSS Flexbox Generator is a visual editor for the container-level properties of CSS flexible box layout. It controls display: flex together with flex-direction, flex-wrap, justify-content, align-items, and gap. The preview container holds between three and six labelled items, each with its own colour, padding, and rounded corners, so the effect of each property on the distribution and alignment of items is easy to follow.
The direction dropdown offers row, row-reverse, column, and column-reverse. Row lays items out horizontally from left to right, row-reverse flips that order, column stacks items vertically from top to bottom, and column-reverse flips the vertical order. The wrap dropdown offers nowrap, wrap, and wrap-reverse, controlling whether items stay on one line or flow onto additional lines when the container is too narrow. The alignment dropdowns cover the main axis and the cross axis, whose directions depend on the chosen flex-direction.
The gap slider runs from 0 to 40 pixels and sets the space between items in both directions. The item count dropdown lets you preview three, four, five, or six items, which is enough to see wrapping and distribution behaviour without clutter. The generated CSS is a single .container rule listing all six properties, so the copied code is complete for the container. Item-level properties such as flex-grow, flex-shrink, and align-self are not part of this tool and must be added by hand when needed.
- Direction control: row, row-reverse, column, and column-reverse.
- Wrapping control: nowrap, wrap, and wrap-reverse.
- Main-axis alignment: flex-start, flex-end, center, space-between, space-around, and space-evenly.
- Cross-axis alignment: stretch, flex-start, flex-end, center, and baseline.
- Gap and item count: a gap slider from 0 to 40 pixels and three to six preview items.
How to Use the CSS Flexbox Generator
Change one property at a time and watch the items move. The fastest way to learn flexbox is to predict the result, change the setting, and compare.
- Choose the flex-direction. Use the flex-direction dropdown to select row, row-reverse, column, or column-reverse. Notice how the main axis changes: in row modes the main axis is horizontal, and in column modes it is vertical.
- Choose the flex-wrap behaviour. Use the flex-wrap dropdown to select nowrap, wrap, or wrap-reverse. With nowrap, items stay on one line even if they become cramped. With wrap, extra items flow onto a new line.
- Set justify-content. Use the justify-content dropdown to control distribution along the main axis. Try center to gather items in the middle, space-between to push the first and last items to the edges, and space-evenly to give every gap, including the ends, equal space.
- Set align-items. Use the align-items dropdown to control alignment along the cross axis. Stretch makes items fill the container height in row mode, center aligns them in the middle, and baseline aligns their text baselines.
- Adjust the gap. Drag the Gap slider between 0 and 40 pixels. The gap applies between items only, not around the outside of the container, which makes spacing predictable without margin tricks.
- Change the item count. Use the Items dropdown to preview three, four, five, or six items. More items make wrapping and distribution differences easier to see, especially with space-between and space-around.
- Copy the CSS. Click Copy CSS to copy the .container rule. Paste it into your stylesheet and rename .container to the class used by your own flex container.
Key Features of the CSS Flexbox Generator
The tool focuses on the container properties that define most flexbox layouts, with a preview that makes axis behaviour concrete.
- Full direction set: all four flex-direction values are available, including the reverse variants that flip item order without changing the HTML.
- Complete alignment options: six justify-content values and five align-items values cover the combinations used in real navigation bars, toolbars, and card rows.
- Visible gap control: the gap slider shows how uniform spacing between items differs from margins, because no extra space appears at the container edges.
- Coloured labelled items: each preview item has a distinct colour and a label, so item order, reversal, and wrapping are easy to track.
- Dashed container outline: the preview container has a dashed border and padding, making its boundaries visible even when items are centred or pushed to the edges.
- Complete container rule: the output lists display, direction, wrap, both alignment properties, and gap in one rule.
Practical Use Cases
Flexbox is a one-dimensional layout method: it arranges items along a line, with wrapping as a secondary behaviour. The examples below are the jobs it does best.
Navigation bars
A typical header uses a row direction, no wrapping, space-between to push the logo left and the links right, and center alignment on the cross axis so everything lines up vertically. Build that combination here, copy the rule, and apply it to your header element.
Centring content
Centring an element both horizontally and vertically is one of the classic flexbox tasks. With a row direction, justify-content set to center, and align-items set to center, a single item sits in the middle of its container. This pattern suits hero sections, empty states, and loading screens.
Card rows and toolbars
Rows of cards or toolbar buttons benefit from wrapping and a consistent gap. Set the direction to row, wrapping to wrap, and a gap of 12 to 16 pixels, and the items will flow onto new lines as the container narrows. The gap keeps the spacing even without manual margins.
Vertical stacks
Forms, sidebars, and article layouts often stack items vertically with even spacing. A column direction with a gap produces a clean stack, and justify-content then controls the vertical distribution while align-items controls the horizontal alignment of the items.
Footers and split layouts
A footer with a copyright notice on one side and links on the other is a natural space-between layout. A split layout with an image and text side by side uses a row direction with centred cross-axis alignment. Both patterns are quick to prototype in this tool before writing the final code.
Tips and Best Practices
Flexbox rewards clear thinking about axes. Keep these habits in mind and the properties will feel less mysterious.
- Name the axes first: before choosing alignment values, say whether the main axis is horizontal or vertical for your direction. That one sentence prevents most flexbox confusion.
- Prefer gap over margins: gap applies only between items, so you avoid the double-spacing and edge-spacing problems that margins create in a flex container.
- Use wrap deliberately: nowrap is right for a navigation bar that must stay on one line, but a card grid usually needs wrap so it can adapt to narrow screens.
- Reserve reverse values for order changes: row-reverse and column-reverse change visual order without changing the document order, which can confuse keyboard and screen reader users if overused. Use them sparingly.
- Combine with item properties in your own code: this tool sets container properties only. For items that should grow, shrink, or align individually, add flex, flex-grow, or align-self rules yourself.
- Test with real content: preview items are uniform, but real items have different heights and text lengths. Check the layout with your actual content, especially with baseline and stretch alignment.
Limitations
This generator covers container-level flexbox properties only. It does not set item-level properties such as flex-grow, flex-shrink, flex-basis, order, or align-self, and it does not control align-content for multi-line containers. The preview items have fixed padding and no real content, so the tool cannot show how items of different sizes, long text, or images will behave in your layout.
The generated rule always uses the selector .container, which you must rename to match your markup. The tool also does not produce responsive variants: if a row should become a column on small screens, that media query must be written separately. Use the copied rule as a starting point and refine it with your own item rules and breakpoints.
- Container properties only; no item-level flex properties.
- No align-content control for multi-line layouts.
- Preview items are uniform; real content may behave differently.
- Output uses the .container selector; rename it for your project.
Frequently Asked Questions
What is the difference between justify-content and align-items?
Justify-content distributes items along the main axis, which is set by flex-direction. Align-items aligns items along the cross axis, which runs perpendicular to the main axis. In a row layout, justify-content works horizontally and align-items works vertically. In a column layout, the roles swap.
When should I use space-between, space-around, or space-evenly?
Space-between puts no space at the ends and equal space between items, which suits headers and footers. Space-around gives each item equal space on both sides, so the end gaps are half the inner gaps. Space-evenly makes every gap, including the ends, exactly equal. Try all three in the preview with four or five items to see the difference.
Why do my items overflow instead of wrapping?
Check that flex-wrap is set to wrap rather than nowrap. With nowrap, the default, items stay on one line and may shrink or overflow. With wrap, items that do not fit move onto a new line. This tool lets you switch between the two and see the effect immediately.
Does flexbox work for two-dimensional grids?
Flexbox is designed for one-dimensional layouts: a row or a column, with wrapping. For a true grid with aligned rows and columns, CSS Grid is usually the better tool. Use flexbox for navigation, toolbars, and card rows, and grid for page layouts and aligned tables of content.
What does the gap property do?
Gap sets the space between flex items, both between rows and between columns when wrapping. It does not add space around the outside of the container. Using gap is simpler and more predictable than adding margins to each item, because you set the spacing once on the container.
From Preview to Real Layout
The preview in the CSS Flexbox Generator uses uniform items, and real layouts rarely do. Real navigation links have different word lengths, real cards have different amounts of text, and real toolbar buttons mix icons, labels, and badges. Those differences are where flexbox shows both its strength and its limits. The strength is that the container properties from this tool keep working: direction, wrapping, alignment, and gap apply just as well to uneven items as to uniform ones. The limit is that uneven items expose behaviours the preview hides, such as a tall card stretching its neighbours when align-items is set to stretch, or a long label wrapping inside a narrow item.
The remedy is to prototype with real content as early as possible. Copy the container rule from this tool into your project, replace the preview items with your actual markup, and then adjust. If one item needs to grow to fill extra space, add a flex-grow rule to that item in your own stylesheet. If one item should align differently from the rest, add an align-self rule to it. If the longest label wraps awkwardly, consider a minimum width or a white-space rule for that item. None of those adjustments are generated here, because this tool covers container properties only, but they are the natural next step after the container is right.
Wrapping behaviour deserves a final check with real content. A row that fits comfortably on a desktop may wrap at an awkward point on a tablet, leaving a single orphan item on the second line. The gap and wrap settings from this tool determine where that break happens, but only real content shows whether the break looks intentional. Resize the browser slowly through the full range, watch where items wrap, and adjust the gap or the item sizes until every breakpoint in the range looks deliberate.
Related Tools
These tools cover grid layout, responsive breakpoints, and other layout-adjacent tasks.
- CSS Grid Generator – build two-dimensional grid layouts with rows and columns.
- CSS Media Query Generator – change a flex layout at different screen widths.
- CSS Transform Generator – rotate, scale, and move individual elements.
- CSS Button Generator – style buttons that often sit inside flex toolbars.
- HTML Table Generator – build tabular content when a grid of data is the right structure.