Home › All Tools ›

Angle Converter

Use Angle Converter online for free at FreeToolZones — no sign-up, no watermark.

Loading tool...

The Angle Converter on FreeToolZones converts angle measurements between seven units, from degrees and radians to gradians, turns, arcminutes, arcseconds, and mils, so an angle given in one system can be used in the system your calculation, your instrument, or your field expects. Enter a number, choose the unit you have and the unit you want, and the result appears immediately, together with the same angle in every other supported unit. Angles are unusual because the most familiar unit, the degree, is not the unit mathematics prefers: calculus and trigonometry are simplest in radians, surveying and artillery use gradians and mils, and astronomy uses arcminutes and arcseconds. Moving between those units correctly is essential whenever an angle crosses from one field into another.

A student meets degrees in school geometry and radians in trigonometry. A surveyor reads a theodolite in degrees, minutes, and seconds, or in gradians. A soldier or a shooter adjusts a sight in mils. An astronomer describes the separation of two stars in arcminutes and arcseconds. A programmer rotating a shape in code must supply the angle in radians, even though the design was specified in degrees. Each of these people needs the same operation, and each of them can be badly misled by entering a degree value where a radian value is expected, or vice versa. This tool makes the conversion explicit, shows all seven equivalents at once, and removes the guesswork.

What Is the Angle Converter?

The Angle Converter is a free browser-based tool that converts an angle value from one angular unit to another. It runs entirely in your browser, updates live as you type, and needs no account or installation. The default conversion is one degree to radians, the pairing that students and programmers meet most often when they first encounter radian measure.

Seven units are supported: degree, radian, gradian, turn, arcminute, arcsecond, and mil (NATO). A full turn, a complete circle, is 360 degrees, 2 pi radians (about 6.28319), 400 gradians, 21,600 arcminutes, 1,296,000 arcseconds, and 6400 NATO mils. The tool defines each unit relative to the degree: one radian is 57.29577951308232 degrees, which is 180 divided by pi; one gradian is 0.9 degrees, because 400 gradians make a circle; one turn is 360 degrees; one arcminute is one 60th of a degree; one arcsecond is one 3600th of a degree; and one NATO mil is 0.05625 degrees, because 6400 mils make a circle.

The radian deserves explanation because it is the least intuitive unit for newcomers. A radian is the angle formed when the arc length along a circle equals the radius of that circle. Because the circumference of a circle is 2 pi times its radius, a full circle is 2 pi radians, a half circle is pi radians, and a right angle is pi over 2 radians, about 1.5708. Radians are preferred in mathematics because the derivatives and series for sine and cosine take their simplest forms in radians, and because arc length equals radius times angle only when the angle is in radians. Degrees remain the practical unit for everyday measurement, navigation, and construction, so the degree-radian conversion is one of the most frequently needed in all of mathematics and computing.

The mil also needs a note. The tool uses the NATO mil, defined as one 6400th of a circle, and labels it “Mil (NATO)” to make that explicit. Other mil definitions exist, including the Soviet mil of one 6000th of a circle and the mathematical milliradian, which is one thousandth of a radian and gives about 6283 mils per circle. Those differ from the NATO mil by several percent, so if your source uses a different mil, confirm the definition before converting. The gradian, sometimes called the gon, divides a right angle into 100 parts and is used in some surveying traditions, particularly in parts of Europe.

How to Use the Angle Converter

The converter recalculates on every keystroke and dropdown change. The steps below match the controls on the page.

  1. Enter an angle. Type your number into the Value field, which starts with the number 1. Decimals are accepted, so 45, 1.5708, and 0.5 all work. Negative angles are accepted and represent rotation in the opposite direction.
  2. Choose the unit you have. Use the From dropdown to select the unit your angle is in, such as Degree, Radian, or Arcminute. Note the Mil (NATO) label, which identifies the mil definition used.
  3. Choose the unit you want. Use the To dropdown to select the target unit, such as Gradian, Turn, or Arcsecond. The result updates immediately.
  4. Read the result and the table. The large display shows the conversion as a sentence, such as “1 Degree = 0.017453 Radian”. The table below lists the angle in all seven units.
  5. Swap the direction. Click the Swap units button to exchange the From and To units and recalculate at once, useful when checking a conversion in both directions.
  6. Copy the result. Click the Copy result button to copy the main conversion sentence to your clipboard, ready to paste into a calculation, a program comment, or a message.

If the field is empty, the tool asks for a value, and if the entry is not a valid number, it asks for a valid number. Results display up to six decimal places with trailing zeros removed, and very large or small results use scientific notation. Note that the tool converts a single decimal number: it does not accept angles written in degrees, minutes, and seconds notation, such as 45 degrees 30 minutes, as a single input. Convert such an angle to decimal degrees first, by adding the minutes divided by 60 and the seconds divided by 3600, and then enter the decimal result.

Key Features of the Angle Converter

  • Seven angular units. Degrees, radians, gradians, turns, arcminutes, arcseconds, and NATO mils cover mathematics, surveying, astronomy, navigation, and military use in one tool.
  • NATO mil explicitly labelled. The mil unit is identified as the NATO definition, 6400 per circle, so there is no ambiguity with other mil definitions.
  • Exact standard factors. The radian factor uses the full precision value of 180 divided by pi, and the other factors follow their definitions, so results agree with reference tables.
  • Live results. Every change recalculates instantly, making it quick to sweep through a range of angles, such as a set of bearings or a series of test values.
  • Full conversion table. All seven equivalents appear at once, which is ideal for checking a result, for documents that need more than one unit, and for learning the relationships between units.
  • Swap units button. One click reverses the conversion, useful when working back and forth between degrees and radians during a calculation.
  • Copy result button. The result sentence copies as plain text, avoiding transcription errors in code, homework, and reports.
  • Runs in the browser. No account and no installation, usable on a phone, tablet, or computer.

The table is a learning aid as well as a calculator. Entering 180 degrees and reading the table shows pi radians, 200 gradians, half a turn, 10,800 arcminutes, 648,000 arcseconds, and 3200 mils, all at once. That single view teaches the structure of angular measure more effectively than a list of separate conversions, and it gives students a reference they can return to whenever a unit feels unfamiliar.

Practical Use Cases for Angle Conversion

Mathematics, trigonometry, and study

Students constantly convert between degrees and radians. A trigonometry problem may give an angle in degrees while the formula requires radians, or a calculus problem may give a result in radians that must be interpreted in degrees. A 45 degree angle is pi over 4 radians, about 0.785398, and a 60 degree angle is pi over 3 radians, about 1.047198. Converting before substituting into a formula prevents the most common trigonometry error: evaluating sine or cosine in the wrong mode. The table lets a student check a conversion against known landmarks, such as 90 degrees equal to pi over 2 radians, before trusting it.

Programming, graphics, and robotics

Programming languages and graphics libraries almost always expect angles in radians for trigonometric functions and rotations, while designers and users think in degrees. A game developer rotating a character by 30 degrees must pass about 0.523599 radians to the rotation function, and a robotics engineer converting a sensor reading in degrees into a control calculation in radians faces the same step. Entering a degree value where radians are expected produces a wildly wrong rotation, often by a factor of about 57, and converting with the tool before coding, or checking a value in the table, prevents that class of bug. The turn unit is also useful in programming, because some animation systems specify rotation as a fraction of a turn.

Surveying, construction, and navigation

Surveyors measure angles in degrees, gradians, or mils depending on the instrument and the national tradition. A survey angle of 100 gradians is a right angle, 90 degrees, and converting a gradian reading into degrees lets it be used with drawings and calculations that assume degrees. Navigators work with bearings in degrees, but some instruments and charts use arcminutes for fine position work: one arcminute of latitude is one nautical mile, which connects angle conversion with distance at sea. Builders setting out angles for roofs, stairs, and ramps work in degrees, but may need radians when a calculation involves arc length or curvature.

Astronomy and optics

Astronomers describe small angles in arcminutes and arcseconds because the separations between stars, the apparent sizes of planets, and the resolution of telescopes are all tiny fractions of a degree. The full Moon appears about 31 arcminutes wide, about half a degree, and a telescope’s resolving power may be quoted in arcseconds. Converting an arcsecond figure into degrees or radians is necessary before using it in a calculation involving distances, such as working out the physical size of an object from its angular size and distance. The tool’s arcminute and arcsecond units cover these small angles directly, with the table showing the degree and radian equivalents alongside.

Shooting, military, and precision adjustment

Military and long-range shooting sights are adjusted in mils, because one mil subtends about one metre at a distance of 1000 metres under the NATO definition, approximately, which makes range estimation and correction simple in the field. Converting a correction given in degrees or arcminutes into mils lets a shooter apply it on a mil-based sight, and converting a mil adjustment back into degrees helps compare sights that use different units. The approximation in the mil system is deliberate and practical: at 1000 metres, one NATO mil subtends about 1.02 metres, close enough to one metre for field use, and the tool’s exact conversion preserves the definition while the field approximation remains a matter of practice, not of the converter.

Tips and Best Practices for Converting Angles

  • Check your calculator or code mode. Before using a converted angle, confirm whether the next step expects degrees or radians. Most trigonometry errors come from a mode mismatch, not from the conversion itself.
  • Convert degrees, minutes, and seconds to decimal first. Add minutes divided by 60 and seconds divided by 3600 to the whole degrees. For example, 45 degrees 30 minutes is 45.5 degrees. Enter the decimal value in the tool.
  • Learn the radian landmarks. Memorise that 30, 45, 60, 90, and 180 degrees are pi over 6, pi over 4, pi over 3, pi over 2, and pi radians. Those five landmarks cover most school and university work.
  • Confirm which mil you mean. This tool uses the NATO mil, 6400 per circle. If your source uses a 6000 mil circle or milliradians, the conversion will differ, so check the definition in your manual before converting.
  • Keep full precision for intermediate steps. A radian value rounded to two decimal places can introduce a noticeable error in a long calculation. Use the tool’s fuller display for intermediate steps and round only the final answer.
  • Use the table to verify. If a converted angle looks implausible, read the table. A degree value entered as radians, or vice versa, will produce table entries that are obviously wrong in every unit.

When writing an angle down for someone else, always state the unit. A bare number such as “1.57” could be degrees or radians, and the difference is a factor of about 57. The tool’s result sentence names both units, and copying it preserves that essential information.

Limitations of the Angle Converter

The Angle Converter converts angle values between the seven listed units. It does not accept degrees, minutes, and seconds notation as a single input, it does not convert bearings to azimuths or vice versa, and it does not perform trigonometric calculations, such as finding the sine or cosine of an angle. It uses the NATO mil definition only, so other mil definitions need a separate factor. The tool converts angles as numbers and does not normalise them: an angle of 400 degrees converts as 400 degrees, not as 40 degrees, even though the two point in the same direction, and reducing an angle to the range of one circle is a separate step if you need it. Results display up to six decimal places, which is ample for most purposes, but surveying and astronomical work that needs arcsecond precision should keep the fuller values and confirm critical figures with the relevant instruments and standards.

Frequently Asked Questions About the Angle Converter

How many radians are in 180 degrees?

One hundred and eighty degrees is pi radians, about 3.141593 radians. The general rule is to multiply degrees by pi and divide by 180 to get radians, and to multiply radians by 180 and divide by pi to get degrees. One degree is about 0.017453 radians, and one radian is about 57.29578 degrees.

What is a gradian, and when is it used?

A gradian, also called a gon, is one 400th of a circle, so a right angle is 100 gradians. Gradians are used in surveying in some countries, particularly in parts of Europe, because dividing a right angle into 100 parts fits decimal working. One gradian is 0.9 degrees. The tool includes gradians alongside degrees and radians, so survey readings can be converted into the unit a calculation or a drawing expects.

What is the difference between an arcminute and a minute of time?

An arcminute is a unit of angle: one 60th of a degree. A minute of time is a unit of duration: one 60th of an hour. They share a name and a factor of 60, but they measure different things and must not be confused. Similarly, an arcsecond is one 3600th of a degree, while a second of time is one 3600th of an hour. The tool’s arcminute and arcsecond units are angular units, and the Time Converter handles minutes and seconds of duration.

How many mils are in a degree?

Using the NATO mil definition in this tool, one degree is about 17.77778 mils, because 6400 mils make 360 degrees. One mil is 0.05625 degrees. Other mil definitions give different answers: a 6000 mil circle gives about 16.67 mils per degree, and milliradians give about 17.45 per degree. Always confirm which mil definition your source uses.

Why do programmers use radians instead of degrees?

Trigonometric functions in programming languages are defined in radians because the mathematics is simplest in that unit: the series expansions, derivatives, and arc length formulas all take their cleanest forms in radians. Degrees are a human convention based on dividing a circle into 360 parts, while radians are defined by the geometry of the circle itself. Programmers therefore convert degree inputs into radians before calling sine, cosine, or rotation functions, and convert radian results back into degrees for display.

Related Tools

Angles lead naturally into triangles, circles, and rotations. The Trigonometry Calculator finds sines, cosines, and triangle sides, the Scientific Calculator handles trigonometric functions directly, and the Length Converter covers the distances that combine with angles in surveying. For visual work, the CSS Transform Generator uses rotation angles in stylesheets, and the Image Rotator rotates images by an angle. You can find every tool from the FreeToolZones home page.

Browse More Tools