The Pressure Converter on FreeToolZones converts pressure measurements between eight units, from pascals to pounds per square inch, so a tyre pressure, a weather reading, a boiler specification, or a laboratory vacuum can be expressed in the unit your gauge, your manual, or your local convention uses. Enter a number, choose the unit you have and the unit you want, and the result appears immediately, together with the same pressure in every other supported unit. Pressure is one of the most confusing quantities to convert by hand because its units come from completely different origins: some are defined from force and area, some from the height of a column of mercury, and some from the weight of the atmosphere itself. This tool keeps those definitions straight and applies the standard factors consistently.
Pressure affects daily life more than most people realise. Car and bicycle tyres are inflated to a pressure quoted in psi or bar. Weather forecasts describe atmospheric pressure in millibars or hectopascals, which are the same thing, or in inches of mercury. Divers, pilots, and engineers work with atmospheres, torr, and pascals. A pressure cooker, a boiler, a compressor, and a vacuum chamber each have their own customary unit. Converting between them accurately is not just convenient: for tyres, boilers, and breathing apparatus, the correct pressure is a safety matter, and a unit error can mean a dangerously over- or under-pressurised system.
What Is the Pressure Converter?
The Pressure Converter is a free browser-based tool that converts a pressure value from one unit to another. It runs entirely in your browser, updates live as you type, and needs no account or installation. The default conversion is one pascal to pounds per square inch, connecting the scientific unit with the unit most familiar from tyre gauges in the United States and the United Kingdom.
Eight units are supported: pascal, kilopascal, bar, millibar, atmosphere, pounds per square inch (psi), torr (mmHg), and inches of mercury. The pascal is the base unit: one pascal is one newton of force per square metre. One kilopascal is 1000 pascals. One bar is 100,000 pascals, and one millibar is 100 pascals, which makes one millibar exactly equal to one hectopascal, the unit used in many weather reports. One standard atmosphere is 101,325 pascals, the average pressure of the atmosphere at sea level. One psi is 6894.757293168 pascals. One torr, which is the same as one millimetre of mercury, is 133.322387415 pascals. One inch of mercury is 3386.389 pascals.
The relationships between these units tell the history of pressure measurement. The torr and the inch of mercury come from the barometer, which measures pressure by the height of a mercury column. The atmosphere comes from the pressure of the air itself at sea level. The bar was chosen to be close to one atmosphere for convenience, and the pascal is the coherent metric unit derived from force and area. The psi comes from the imperial system of pounds and square inches. Because these origins are so different, there is no simple mental factor between most pairs, which is exactly why a converter is useful: the factors, such as 14.6959 psi per atmosphere or 29.92 inches of mercury per atmosphere, are not numbers most people can recall reliably.
The full conversion table shows the pressure in all eight units at once. That view is useful when a manual quotes one unit, a gauge reads another, and a weather report uses a third: all three readings can be compared in one place. It also helps with the millibar-hectopascal equivalence, because the millibar figure in the table is the hectopascal figure, even though the tool does not list hectopascals separately.
How to Use the Pressure Converter
The converter recalculates on every keystroke and dropdown change. The steps below match the controls on the page.
- Enter a pressure. Type your number into the Value field, which starts with the number 1. Decimals are accepted, so 32, 2.2, and 1013.25 all work. Make sure the number is a pressure, not a force or a depth.
- Choose the unit you have. Use the From dropdown to select the unit your pressure is in, such as Pounds per square inch (psi), Bar, or Millibar. Note that Torr is labelled with mmHg, since the two are the same unit.
- Choose the unit you want. Use the To dropdown to select the target unit, such as Kilopascal, Atmosphere, or Inches of mercury. The result updates immediately.
- Read the result and the table. The large display shows the conversion as a sentence, such as “1 Pascal = 0.000145 Pounds per square inch (psi)”. The table below lists the pressure in all eight units.
- Swap the direction. Click the Swap units button to exchange the From and To units and recalculate at once, useful when checking a conversion in both directions.
- Copy the result. Click the Copy result button to copy the main conversion sentence to your clipboard, ready to paste into a log, a message, or a maintenance record.
If the field is empty, the tool asks for a value, and if the entry is not a valid number, it asks for a valid number. Results display up to six decimal places with trailing zeros removed, and very large or small results use scientific notation. One caution applies to all pressure conversions: the tool converts the numeric value as given, and it does not distinguish between gauge pressure, measured relative to the atmosphere, and absolute pressure, measured relative to a vacuum. A tyre gauge reading of 32 psi is gauge pressure, while a weather pressure of 1013 millibars is absolute. Converting the number is the same operation either way, but comparing a gauge figure with an absolute figure requires adding or subtracting one atmosphere, which is a separate step the tool does not perform.
Key Features of the Pressure Converter
- Eight standard pressure units. Pascals, bars, atmospheres, psi, torr, and inches of mercury cover science, weather, automotive, aviation, diving, and industry.
- Torr and mmHg identified as one unit. The label “Torr (mmHg)” makes clear that the two names describe the same unit, preventing a fruitless search for a conversion between them.
- Standard exact factors. The atmosphere, psi, torr, and inch of mercury factors follow their standard definitions, so results agree with reference tables and instrument manuals.
- Live results. Every change recalculates instantly, so checking a series of gauge readings or a range of specifications takes seconds.
- Full conversion table. All eight equivalents appear at once, letting you compare a manual, a gauge, and a report that each use different units.
- Swap units button. One click reverses the conversion, useful when working back and forth between two systems during maintenance or setup.
- Copy result button. The result sentence copies as plain text, avoiding transcription errors in records and messages.
- Runs in the browser. No account and no installation, usable on a phone beside a vehicle, on a tablet in a plant room, or on a desktop at work.
The gauge-versus-absolute distinction, explained in the steps above, is the most important conceptual point for pressure users, and it is worth repeating: the converter moves a number between units, but it cannot know whether that number was measured against the atmosphere or against a vacuum. Always check which kind of pressure your gauge and your specification use before comparing them, and add one atmosphere when converting a gauge reading to an absolute value, or subtract it when going the other way.
Practical Use Cases for Pressure Conversion
Tyres and vehicles
Tyre pressures are the most common pressure conversion in everyday life. A car handbook may specify 2.2 bar, while a gauge reads in psi, giving about 31.91 psi. A bicycle tyre may need 80 psi, which is about 5.52 bar, and a mountain bike tyre at 30 psi is about 2.07 bar. Converting before inflating prevents the two errors that damage tyres and affect safety: under-inflation, which increases wear and fuel use, and over-inflation, which reduces grip and ride comfort. Always convert the manufacturer’s recommended pressure, which is a gauge pressure, and use a gauge that reads in the unit you converted to, or convert the gauge reading back for comparison.
Weather and atmospheric pressure
Weather reports quote atmospheric pressure in millibars or hectopascals in most of the world and in inches of mercury in the United States. Standard sea-level pressure is 1013.25 millibars, which is 29.92 inches of mercury and 101.325 kilopascals. A falling pressure, such as a drop from 1015 to 995 millibars, often signals approaching unsettled weather, while a high pressure above 1025 millibars often brings settled conditions. Converting a report into the unit you are used to lets you judge whether a reading is high, low, or normal without learning a second scale. Barometers in homes may show inches of mercury, while phone weather apps show millibars, and the converter reconciles the two.
Boilers, compressors, and industrial equipment
Industrial equipment specifies operating pressures in bar, psi, or kilopascals depending on the manufacturer and the country. A compressor rated at 8 bar delivers about 116 psi, and a boiler safety valve set at 3 bar opens at about 43.51 psi. Maintenance staff converting a specification into the unit their gauge reads can verify that a system is operating within limits, and converting a gauge reading into the unit used in a log keeps records consistent. For pressure vessels and safety devices, always confirm the converted value against the manufacturer’s documentation and never exceed a rated pressure on the basis of a conversion alone.
Diving, aviation, and altitude
Divers work with atmospheres of pressure, because each 10 metres of seawater adds about one atmosphere. A dive to 20 metres exposes a diver to about 3 atmospheres absolute, and converting that to bar, about 3.04 bar, or psi, about 44.09 psi, helps compare dive tables and gauge readings from different sources. In aviation, altimeter settings are given in inches of mercury in the United States and in hectopascals, equal to millibars, elsewhere, and converting the setting is part of flying between those regions. Cabin pressure, oxygen systems, and weather minima all involve pressure units, and the converter’s table lets each be read in the unit the relevant procedure uses.
Science, medicine, and laboratory work
Blood pressure is measured in millimetres of mercury, which is the torr unit, and a reading of 120 over 80 mmHg converts to about 16 kilopascals over 10.67 kilopascals, although medical practice keeps mmHg as the standard and conversion is mainly for physics and engineering comparisons. Vacuum systems in laboratories are described in torr, millibar, or pascals, and converting between them is necessary when a pump specification, a gauge, and a procedure each use a different unit. Gas laws in chemistry use pressure in atmospheres, pascals, or torr depending on the form of the gas constant chosen, and converting the pressure into the unit that matches the constant is a necessary step in the calculation.
Tips and Best Practices for Converting Pressure
- Know whether a pressure is gauge or absolute. Gauge pressure is relative to the atmosphere; absolute pressure is relative to a vacuum. They differ by about one atmosphere. Never compare a gauge figure with an absolute figure without adjusting by one atmosphere.
- Remember that millibars equal hectopascals. One millibar is exactly one hectopascal, so a weather report in either unit gives the same number. The tool lists millibars, and that figure is the hectopascal figure too.
- Use the gauge’s unit when possible. If your gauge reads in psi and your specification is in bar, convert the specification into psi once and write it down, rather than converting every gauge reading. Fewer conversions mean fewer chances for error.
- Round to the gauge’s precision. A tyre gauge that reads to the nearest psi does not justify a conversion with six decimal places. Round the converted value to what the gauge can actually show.
- Double-check safety-critical values. For boilers, pressure vessels, breathing apparatus, and diving equipment, confirm a converted pressure with a second source or a second calculation. A unit error in these contexts can be dangerous.
- Note the unit in records. A log entry of “32” is meaningless without its unit. Record “32 psi” or “2.2 bar”, and copy the tool’s result sentence, which names the unit, to preserve that information.
When a pressure must be maintained within a range, convert both ends of the range into the gauge’s unit and mark them on or near the gauge. That way, every reading can be judged at a glance without any further conversion, and anyone else using the equipment can do the same.
Limitations of the Pressure Converter
The Pressure Converter converts pressure values between the eight listed units. It does not distinguish gauge from absolute pressure, it does not convert pressure differences caused by altitude or depth, and it does not include units such as the kilogram-force per square centimetre, the pound-force per square foot, or the micron used in vacuum work, although those can be converted through pascals with a reliable reference factor. It does not calculate pressure from force and area, or from depth and density, which are separate physics calculations. The atmosphere unit is the standard atmosphere of 101,325 pascals, while the actual atmospheric pressure at any place and time varies with weather and altitude, so converting a local pressure reading into atmospheres gives a ratio to the standard value, not a statement about local conditions. Results display up to six decimal places, which is ample for gauges and weather, but instrument calibration should rely on the instrument’s own standards.
Frequently Asked Questions About the Pressure Converter
How many psi are in one bar?
One bar is about 14.5038 psi. The common rounded value of 14.5 psi per bar is close enough for tyre pressures and most workshop purposes, but the tool shows the fuller value for precision. A tyre pressure of 2.2 bar is therefore about 31.91 psi, and a pressure of 30 psi is about 2.07 bar.
What is the difference between gauge pressure and absolute pressure?
Gauge pressure is measured relative to the surrounding atmospheric pressure, so a gauge open to the air reads zero. Absolute pressure is measured relative to a perfect vacuum, so the same open gauge would read about one atmosphere. A tyre gauge reading of 32 psi is gauge pressure, meaning 32 psi above atmospheric, or about 46.7 psi absolute. The converter moves numbers between units; it does not add or subtract the atmosphere, so you must know which kind of pressure you have.
How many millibars is standard atmospheric pressure?
Standard atmospheric pressure is 1013.25 millibars, which is the same as 1013.25 hectopascals, 101.325 kilopascals, 29.92 inches of mercury, and 14.6959 psi. Actual pressure varies with weather and altitude: high pressure systems may exceed 1030 millibars, while the centre of a strong storm may fall below 980 millibars. Converting a local reading into atmospheres expresses it as a fraction of the standard value.
Is a torr the same as a millimetre of mercury?
Yes, for practical purposes they are the same unit, and the tool labels the unit “Torr (mmHg)” to say so. The torr is defined as one 760th of a standard atmosphere, and a millimetre of mercury is the pressure exerted by a one millimetre column of mercury, and the two agree to within a tiny fraction that does not matter for ordinary use. Blood pressure readings in mmHg can therefore be entered as torr in the tool.
Why do weather reports use millibars in some countries and inches of mercury in others?
The difference is historical. Mercury barometers, which read in inches of mercury, were the standard instrument in the English-speaking world, while metric countries adopted the millibar and later the hectopascal. Both describe the same physical quantity, and the converter translates between them: 29.92 inches of mercury is 1013.25 millibars. Modern electronic barometers can usually display either unit, and converting a report into your familiar unit makes it easier to judge whether pressure is high or low.
Related Tools
Pressure rarely appears alone. The Temperature Converter handles the temperatures that accompany pressure in weather and engineering, the Energy Converter covers the energy in compressed air and steam systems, and the Volume Converter handles the capacities of tanks and vessels. The Speed Converter is useful for wind speeds in weather reports, and the Length Converter converts the depths and heights that produce pressure differences. You can find every tool from the FreeToolZones home page.